@@ Строка 4: / Строка 4: @@
 == Конфигурационный файл ==
+<<pre
+# motion.conf
+# Этот конфигурационный файл для motion версии 3.2.12
+############################################################
+# Daemon
+############################################################
+# Start in daemon (background) mode and release terminal (default: off)
+daemon on
+# File to store the process ID, also called pid file. (default: not defined)
+process_id_file /var/run/motion/motion.pid
+############################################################
+# Basic Setup Mode
+############################################################
+#Запуск в режиме демона. !!!Быть очень внимательным, возможно появление артефактов, или пропадании изображения!!!
+# Start in Setup-Mode, daemon disabled. (default: off)
+setup_mode off
+###########################################################
+# Capture device options
+############################################################
+# Устройство для захвата видео - если камера одна - оставить как есть, иначе добавить необходимые устройства
+# по необходимости
+videodevice /dev/video0
+# v4l2_palette allows to choose preferable palette to be use by motion
+# to capture from those supported by your videodevice. (default: 8)
+# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
+# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
+# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
+# instead.
+#
+# Values :
+# V4L2_PIX_FMT_SN9C10X : 0  'S910'
+# V4L2_PIX_FMT_SBGGR8  : 1  'BA81'
+# V4L2_PIX_FMT_MJPEG   : 2  'MJPEG'
+# V4L2_PIX_FMT_JPEG    : 3  'JPEG'
+# V4L2_PIX_FMT_RGB24   : 4  'RGB3'
+# V4L2_PIX_FMT_UYVY    : 5  'UYVY'
+# V4L2_PIX_FMT_YUYV    : 6  'YUYV'
+# V4L2_PIX_FMT_YUV422P : 7  '422P'
+# V4L2_PIX_FMT_YUV420  : 8  'YU12'
+#v4l2_palette 8
+v4l2_palette 3
+# Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
+# This is ONLY used for FreeBSD. Leave it commented out for Linux
+; tunerdevice /dev/tuner0
+# Какой вход для видео использовать. В случае USB-камеры оставить как есть.
+# (default: 8)
+# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
+input 8
+# The video norm to use (only for video capture and TV tuner cards)
+# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
+norm 0
+# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
+frequency 0
+# Rotate image this number of degrees. The rotation affects all saved images as
+# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
+rotate 180
+#Разрешение видео, выдаваемое камерой - отредактировать в соответствии с характеристиками своей камеры
+# Image width (pixels). Valid range: Camera dependent, default: 352
+width 640
+#width 320
+# Image height (pixels). Valid range: Camera dependent, default: 288
+height 480
+#height 240
+#Число кадров в секунду - опять же в соответствии с характеристиками камеры.Для PAL стандартное
+#значение - 25 кадров/с
+# Maximum number of frames to be captured per second.
+# Valid range: 2-100. Default: 100 (almost no limit).
+framerate 25
+# Minimum time in seconds between capturing picture frames from the camera.
+# Default: 0 = disabled - the capture rate is given by the camera framerate.
+# This option is used when you want to capture images at a rate lower than 2 per second.
+minimum_frame_time 0
+# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
+# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
+; netcam_url value
+# Username and password for network camera (only if required). Default: not defined
+# Syntax is user:password
+; netcam_userpass value
+# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
+# 1.0:         The historical implementation using HTTP/1.0, closing the socket after each http request.
+# keep_alive:  Use HTTP/1.0 requests with keep alive header to reuse the same connection.
+# 1.1:         Use HTTP/1.1 requests that support keep alive as default.
+# Default: 1.0
+; netcam_http 1.0
+# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
+# If a port number other than 80 is needed, use "http://myproxy:1234".
+# Default: not defined
+; netcam_proxy value
+# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
+# Default: off
+netcam_tolerant_check off
+# Let motion regulate the brightness of a video device (default: off).
+# The auto_brightness feature uses the brightness option as its target value.
+# If brightness is zero auto_brightness will adjust to average brightness value 128.
+# Only recommended for cameras without auto brightness
+#auto_brightness off
+auto_brightness on
+# Set the initial brightness of a video device.
+# If auto_brightness is enabled, this value defines the average brightness level
+# which Motion will try and adjust to.
+# Valid range 0-255, default 0 = disabled
+brightness 0
+# Set the contrast of a video device.
+# Valid range 0-255, default 0 = disabled
+contrast 0
+# Set the saturation of a video device.
+# Valid range 0-255, default 0 = disabled
+saturation 0
+# Set the hue of a video device (NTSC feature).
+# Valid range 0-255, default 0 = disabled
+hue 0
+############################################################
+# Round Robin (multiple inputs on same video device name)
+############################################################
+# Number of frames to capture in each roundrobin step (default: 1)
+roundrobin_frames 1
+# Number of frames to skip before each roundrobin step (default: 1)
+roundrobin_skip 1
+# Try to filter out noise generated by roundrobin (default: off)
+switchfilter off
+############################################################
+# Motion Detection Settings:
+############################################################
+# Секция “Motion Detection Settings”, отвечает за тонкую настройку обнаружения движущихся объектов.
+# Если камера стоит в небольшой комнате, и размеры движущихся предметов большие, проблем с обнаружением обычно нет.
+# Вмешательство потребуется в том случае, когда камера контролирует большую территорию, где объект имеет
+# относительно маленький размер, и срабатывание может быть вызвано колыханием веток деревьев, проезжающими
+# машинами и прочими помехами. На дешевых устройствах запись может начинаться из-за артефактов, вызванных
+# искажениями самой камеры или поведением драйвера.
+# Параметр позволяет указать количество пикселей, которые должны измениться для срабатывания детектора
+# (default: 1500)
+threshold 2500
+# Automatically tune the threshold down if possible (default: off)
+threshold_tune off
+# Отвечает за уровень порога шума
+# (default: 32)
+noise_level 32
+# Automatically tune the noise threshold (default: on)
+noise_tune on
+# Фильтры для сглаживания шума подключаются при помощи despeckle. По умолчанию используется оптимальное
+# значение EedDl. При появлении проблем следует поэкспериментировать, убирая буквы в сочетании EedDl и
+# пробуя их в разных комбинациях (подробнее о despeckle смотри на WiKi Motion и на emit.demon.co.uk/motion).
+# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
+# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
+# (l)abeling must only be used once and the 'l' must be the last letter.
+# Comment out to disable
+despeckle EedDl
+# Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
+# A script (on_area_detected) is started immediately when motion is         4 5 6
+# detected in one of the given areas, but only once during an event.        7 8 9
+# One or more areas can be specified with this option. (Default: not defined)
+; area_detect value
+# Параметров mask_file полезен. Без проблем, делаем снимок камерой,
+# создаем маску, в которой нужная область окрашена белым, а все остальное, что нас не интересует, черным. Сохраняем его в файле
+# формата pgm и указываем путь при помощи mask_file.
+# (Default: not defined)
+; mask_file value
+# Dynamically create a mask file during operation (default: 0)
+# Adjust speed of mask changes from 0 (off) to 10 (fast)
+smart_mask_speed 0
+# Ignore sudden massive light intensity changes given as a percentage of the picture
+# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
+lightswitch 0
+# количество кадров, в которых были зафиксированы изменение со значением параметра threshold
+# Picture frames must contain motion at least the specified number of frames
+# in a row before they are detected as true motion. At the default of 1, all
+# motion is detected. Valid range: 1 to thousands, recommended 1-5
+minimum_motion_frames 1
+# Specifies the number of pre-captured (buffered) pictures from before motion
+# was detected that will be output at motion detection.
+# Recommended range: 0 to 5 (default: 0)
+# Do not use large values! Large values will cause Motion to skip video frames and
+# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
+pre_capture 0
+# Number of frames to capture after motion is no longer detected (default: 0)
+post_capture 0
+# После какого количества секунд отсутствия движения будет перезапущена запись (а файл перезаписан)
+# Gap is the seconds of no motion detection that triggers the end of an event
+# An event is defined as a series of motion images taken within a short timeframe.
+# Recommended value is 60 seconds (Default). The value 0 is allowed and disables
+# events causing all Motion to be written to one single mpeg file and no pre_capture.
+gap 360
+#Ограничение размера файла с записью (в секундах). В случае ненулевого значения после превышения
+#лимита будет создаваться новый файл
+# Maximum length in seconds of an mpeg movie
+# When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
+#max_mpeg_time 0
+max_mpeg_time 600
+# Always save images even if there was no motion (default: off)
+output_all off
+############################################################
+# Image File Output
+############################################################
+# Варианты сохранения скриншота с движением - все подряд(on), ни одного(off), первый с начала движения (first),
+# лучший (best) или с движением ближе к центру изображения (center).
+# (default: on)
+# Возможные значения: on, off, first, best, center
+# Picture with most motion of an event is saved when set to 'best'.
+# Picture with motion nearest center of picture is saved when set to 'center'.
+# Can be used as preview shot for the corresponding movie.
+#output_normal on
+output_normal best
+# Output pictures with only the pixels moving object (ghost images) (default: off)
+output_motion off
+# The quality (in percent) to be used by the jpeg compression (default: 75)
+quality 90
+# Output ppm images instead of jpeg (default: off)
+ppm off
+############################################################
+# FFMPEG related options
+# Film (mpeg) file output, and deinterlacing of the video input
+# The options movie_filename and timelapse_filename are also used
+# by the ffmpeg feature
+############################################################
+#Сохранения потока с камеры как видеофайла.
+# Use ffmpeg to encode mpeg movies in realtime (default: off)
+ffmpeg_cap_new on
+# Use ffmpeg to make movies with only the pixels moving
+# object (ghost images) (default: off)
+ffmpeg_cap_motion off
+# Use ffmpeg to encode a timelapse movie
+# Default value 0 = off - else save frame every Nth second
+ffmpeg_timelapse 0
+#Сколько времени в (секундах) вести запись в один файл.После превышения предела создается новый
+#файл.
+#The file rollover mode of the timelapse video
+#Valid values: hourly(ежечасно), daily (ежедневно,default), weekly-sunday(еженедельно,начало недели в воскресенье),
+#weekly-monday(аналогично с началом в понедельник), monthly(ежемесячно), manual(вручную)
+ffmpeg_timelapse_mode hourly
+# Bitrate to be used by the ffmpeg encoder (default: 400000)
+# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
+ffmpeg_bps 500000
+# Enables and defines variable bitrate for the ffmpeg encoder.
+# ffmpeg_bps is ignored if variable bitrate is enabled.
+# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
+# or the range 2 - 31 where 2 means best quality and 31 is worst.
+ffmpeg_variable_bitrate 0
+#Выбор кодека, которым будет обработан сохраняемый видеопоток. Выбранный кодек должен быть установлен
+#в системе, иначе при запуске Motion будет выдавать ошибку.
+# Codec to used by ffmpeg for the video compression.
+# Timelapse mpegs are always made in mpeg1 format independent from this option.
+# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
+# mpeg1 - gives you files with extension .mpg
+# mpeg4 or msmpeg4 - gives you files with extension .avi
+# msmpeg4 is recommended for use with Windows Media Player because
+# it requires no installation of codec on the Windows client.
+# swf - gives you a flash film with extension .swf
+# flv - gives you a flash video with extension .flv
+# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
+# mov - QuickTime ( testing )
+ffmpeg_video_codec mpeg4
+#Если появляются искажения, можно попробывать включить. Я прбывал когда у меня было нормальное
+#изображение из любопытства. Никакой разницы не заметил
+# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
+# and see horizontal combing on moving objects in video or pictures.
+# (default: off)
+#ffmpeg_deinterlace off
+############################################################
+# Snapshots (Traditional Periodic Webcam File Output)
+############################################################
+#Делает снимки с периодом (секунд), независимо есть движение или его нет.
+# Make automated snapshot every N seconds (default: 0 = disabled)
+#snapshot_interval 0
+snapshot_interval 120
+############################################################
+# Text Display
+# %Y = year, %m = month, %d = date,
+# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
+# %v = event, %q = frame number, %t = thread (camera) number,
+# %D = changed pixels, %N = noise level, \n = new line,
+# %i and %J = width and height of motion area,
+# %K and %L = X and Y coordinates of motion center
+# %C = value defined by text_event - do not use with text_event!
+# You can put quotation marks around the text to allow
+# leading spaces
+############################################################
+#Активация locate будет выделять на снимке движущийся объект.
+# Locate and draw a box around the moving object.
+# Valid values: on, off and preview (default: off)
+# Set to 'preview' will only draw a box in preview_shot pictures.
+#locate off
+locate on
+# Draws the timestamp using same options as C function strftime(3)
+# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
+# Text is placed in lower right corner
+text_right %Y-%m-%d\n%T-%q
+# Draw a user defined text on the images using same options as C function strftime(3)
+# Default: Not defined = no text
+# Text is placed in lower left corner
+# text_left CAMERA %t
+text_left CAMERA KAPMAH
+# Draw the number of changed pixed on the images (default: off)
+# Will normally be set to off except when you setup and adjust the motion settings
+# Text is placed in upper right corner
+text_changes off
+# This option defines the value of the special event conversion specifier %C
+# You can use any conversion specifier in this option except %C. Date and time
+# values are from the timestamp of the first image in the current event.
+# Default: %Y%m%d%H%M%S
+# The idea is that %C can be used filenames and text_left/right for creating
+# a unique identifier for each event.
+text_event %Y%m%d%H%M%S
+# Draw characters at twice normal size on images. (default: off)
+text_double off
+############################################################
+# Target Directories and filenames For Images And Films
+# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
+# you can use conversion specifiers
+# %Y = year, %m = month, %d = date,
+# %H = hour, %M = minute, %S = second,
+# %v = event, %q = frame number, %t = thread (camera) number,
+# %D = changed pixels, %N = noise level,
+# %i and %J = width and height of motion area,
+# %K and %L = X and Y coordinates of motion center
+# %C = value defined by text_event
+# Quotation marks round string are allowed.
+############################################################
+# Target base directory for pictures and films
+# (Default: current working directory,
+# target_dir /usr/local/apache2/htdocs/cam1)
+target_dir /home/andvas/MOTION_VIDEO
+# File path for snapshots (jpeg or ppm) relative to target_dir
+# Default: %v-%Y%m%d%H%M%S-snapshot
+# Default value is equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
+# File extension .jpg or .ppm is automatically added so do not include this.
+# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
+# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
+snapshot_filename %v-%Y%m%d%H%M%S-snapshot
+# File path for motion triggered images (jpeg or ppm) relative to target_dir
+# Default: %v-%Y%m%d%H%M%S-%q
+# Default value is equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
+# File extension .jpg or .ppm is automatically added so do not include this
+# Set to 'preview' together with best-preview feature enables special naming
+# convention for preview shots. See motion guide for details
+jpeg_filename %v-%Y%m%d%H%M%S-%q
+# File path for motion triggered ffmpeg films (mpeg) relative to target_dir
+# Default: %v-%Y%m%d%H%M%S
+# Default value is equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
+# File extension .mpg or .avi is automatically added so do not include this
+# This option was previously called ffmpeg_filename
+movie_filename %v-%Y%m%d%H%M%S
+# File path for timelapse mpegs relative to target_dir
+# Default: %Y%m%d-timelapse
+# Default value is near equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
+# File extension .mpg is automatically added so do not include this
+timelapse_filename %Y%m%d-timelapse
+############################################################
+# Live Webcam Server
+############################################################
+#Номер порта, на котором будет работать встроенный http-сервер Motion - при необходимости прописать любой свободный порт
+# The mini-http server listens to this port for requests (default: 0 = disabled)
+webcam_port 8081
+#Процент качества для сжимаемых в jpeg изображений с камеры, которые будут выводиться в браузер
+# Quality of the jpeg (in percent) images produced (default: 50)
+webcam_quality 60
+#Частота обновления видео в браузере (кадров в секунду) в случае отсутствия зарегистрированного движения -
+#если не планируется просматривать изображение с камеры переодически, то можно отключить. При обнаружении движения частота
+#обновления станет равной параметру webcam_maxrate
+# Output frames at 1 fps when no motion is detected and increase to the
+# rate given by webcam_maxrate when motion is detected (default: off)
+webcam_motion 1
+#Частота обновления видео в браузере в случае регистрации движения программой.
+# Maximum framerate for webcam streams (default: 1)
+webcam_maxrate 15
+#Разрешить(off) или запретить(on) доступ к просмотру камеры с удаленных машин.
+# Restrict webcam connections to localhost only (default: on)
+webcam_localhost off
+# Limits the number of images per connection (default: 0 = unlimited)
+# Number can be defined by multiplying actual webcam rate by desired number of seconds
+# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
+webcam_limit 0
+############################################################
+# HTTP Based Control
+############################################################
+# TCP/IP port for the http server to listen on (default: 0 = disabled)
+control_port 8080
+# Restrict control connections to localhost only (default: on)
+control_localhost off
+# Output for http server, select off to choose raw text plain (default: on)
+control_html_output on
+# Authentication for the http based control. Syntax username:password
+# Default: not defined (Disabled)
+; control_authentication username:password
+#control_authentication andvas:21666383467
+############################################################
+# Tracking (Pan/Tilt)
+############################################################
+# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
+# The generic type enables the definition of motion center and motion size to
+# be used with the conversion specifiers for options like on_motion_detected
+track_type 0
+# Enable auto tracking (default: off)
+track_auto off
+# Serial port of motor (default: none)
+; track_port value
+# Motor number for x-axis (default: 0)
+track_motorx 0
+# Motor number for y-axis (default: 0)
+track_motory 0
+# Maximum value on x-axis (default: 0)
+track_maxx 0
+# Maximum value on y-axis (default: 0)
+track_maxy 0
+# ID of an iomojo camera if used (default: 0)
+track_iomojo_id 0
+# Angle in degrees the camera moves per step on the X-axis
+# with auto-track (default: 10)
+# Currently only used with pwc type cameras
+track_step_angle_x 10
+# Angle in degrees the camera moves per step on the Y-axis
+# with auto-track (default: 10)
+# Currently only used with pwc type cameras
+track_step_angle_y 10
+# Delay to wait for after tracking movement as number
+# of picture frames (default: 10)
+track_move_wait 10
+# Speed to set the motor to (stepper motor option) (default: 255)
+track_speed 255
+# Number of steps to make (stepper motor option) (default: 40)
+track_stepsize 40
+############################################################
+# External Commands, Warnings and Logging:
+# You can use conversion specifiers for the on_xxxx commands
+# %Y = year, %m = month, %d = date,
+# %H = hour, %M = minute, %S = second,
+# %v = event, %q = frame number, %t = thread (camera) number,
+# %D = changed pixels, %N = noise level,
+# %i and %J = width and height of motion area,
+# %K and %L = X and Y coordinates of motion center
+# %C = value defined by text_event
+# %f = filename with full path
+# %n = number indicating filetype
+# Both %f and %n are only defined for on_picture_save,
+# on_movie_start and on_movie_end
+# Quotation marks round string are allowed.
+############################################################
+# Do not sound beeps when detecting motion (default: on)
+# Note: Motion never beeps when running in daemon mode.
+quiet on
+#!!!ВОТ ЗДЕСЬ САМОЕ ИНТЕРЕСНОЕ, МОЖНО УКАЗЫВАТЬ ПУТЬ К СКРИПТАМ КОТОРЫЕ БУДТ ЗАПУСКАТЬСЯ
+#ПРИ СРАБАТЫВАНИЕ НА ОПРЕДЕЛЕННЫЕ СОБЫТИЯ !!!
+# Command to be executed when an event starts. (default: none)
+# An event starts at first motion detected after a period of no motion defined by gap
+; on_event_start value
+#команда, которая будет выполняться при наступлении события, то есть при движении
+on_event_start /etc/motion/on_motion_detected
+# Command to be executed when an event ends after a period of no motion
+# (default: none). The period of no motion is defined by option gap.
+#Команда по окончанию события
+; on_event_end value
+# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
+# To give the filename as an argument to a command append it with %f
+#Команда которыя будет выполняться при сохранении картинки
+; on_picture_save value
+# Command to be executed when a motion frame is detected (default: none)
+# Команда, которая будет выполняться, когда обнаруживается движение кадров (по умолчанию: нет)
+; on_motion_detected value
+# Command to be executed when motion in a predefined area is detected
+# Check option 'area_detect'.   (default: none)
+#Команда которая будет выполняться, когда обнаруживается движение в предопределенной области в предопределенной области
+; on_area_detected value
+# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
+# To give the filename as an argument to a command append it with %f
+# Команда, которая будет выполняться, когда создается видео файл
+; on_movie_start value
+# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
+# To give the filename as an argument to a command append it with %f
+# Команда которая будет выполняться, когда видео файл закрывается
+; on_movie_end value
+# Command to be executed when a camera can't be opened or if it is lost
+# Команда, которая будет выполнятся, когда камера не может быть открыта, или потеряна
+# NOTE: There is situations when motion doesn't detect a lost camera!
+# It depends on the driver, some drivers don't detect a lost camera at all
+# Some hang the motion thread. Some even hang the PC! (default: none)
+#
+; on_camera_lost value
+############################################################
+# Common Options For MySQL and PostgreSQL database features.
+# Options require the MySQL/PostgreSQL options to be active also.
+############################################################
+# Log to the database when creating motion triggered image file  (default: on)
+sql_log_image on
+# Log to the database when creating a snapshot image file (default: on)
+sql_log_snapshot on
+# Log to the database when creating motion triggered mpeg file (default: off)
+sql_log_mpeg off
+# Log to the database when creating timelapse mpeg file (default: off)
+sql_log_timelapse off
+# SQL query string that is sent to the database
+# Use same conversion specifiers has for text features
+# Additional special conversion specifiers are
+# %n = the number representing the file_type
+# %f = filename with full path
+# Default value:
+# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
+sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
+############################################################
+# Database Options For MySQL
+############################################################
+# Mysql database to log to (default: not defined)
+; mysql_db value
+# The host on which the database is located (default: localhost)
+; mysql_host value
+# User account name for MySQL database (default: not defined)
+; mysql_user value
+# User password for MySQL database (default: not defined)
+; mysql_password value
+############################################################
+# Database Options For PostgreSQL
+############################################################
+# PostgreSQL database to log to (default: not defined)
+; pgsql_db value
+# The host on which the database is located (default: localhost)
+; pgsql_host value
+# User account name for PostgreSQL database (default: not defined)
+; pgsql_user value
+# User password for PostgreSQL database (default: not defined)
+; pgsql_password value
+# Port on which the PostgreSQL database is located (default: 5432)
+; pgsql_port 5432
+############################################################
+# Video Loopback Device (vloopback project)
+############################################################
+# Output images to a video4linux loopback device
+# The value '-' means next available (default: not defined)
+; video_pipe value
+# Output motion images to a video4linux loopback device
+# The value '-' means next available (default: not defined)
+; motion_video_pipe value
+##############################################################
+# Thread config files - One for each camera.
+# Except if only one camera - You only need this config file.
+# If you have more than one camera you MUST define one thread
+# config file for each camera in addition to this config file.
+##############################################################
+# Remember: If you have more than one camera you must have one
+# thread file for each camera. E.g. 2 cameras requires 3 files:
+# This motion.conf file AND thread1.conf and thread2.conf.
+# Only put the options that are unique to each camera in the
+# thread config files.
+; thread /usr/local/etc/thread1.conf
+; thread /usr/local/etc/thread2.conf
+; thread /usr/local/etc/thread3.conf
+; thread /usr/local/etc/thread4.conf
+>>

Версия от 10:49, 29 сентября 2011

Установка

Конфигурационный файл